hi Team,
is there any way to restart isis process in IOS ?
i have tried to clear the clns neighbor but no luck .
ISIS sequence number has been reached maximum "0xFFFFFFFF"
Router-1#show processes cpu sorted
CPU utilization for five seconds: 99%/0%; one minute: 99%; five minutes: 99%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
352 3982241876 811511454 4907 99.03% 98.87% 98.62% 0 ISIS Upd dcn
90 23318692 209210093 111 0.16% 0.11% 0.10% 0 Per-Second Job
Router-1#show version
Cisco IOS Software, C2951 Software (C2951-UNIVERSALK9-M), Version 15.4(3)M5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Tue 09-Feb-16 05:48 by prod_rel_team
Router-1#show isi database Router-1.2B-00 verbose
Tag dcn:
IS-IS Level-1 LSP Router-1.2B-00
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
Router-1.2B-00 * 0xFFFFFFFF 0x6443 0 0/0/0
Metric: 0 IS Router-1.00
Metric: 0 ES 0000.0020.6883
IS-IS Level-2 LSP Router-1.2B-00
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
Router-1.2B-00 * 0x00000000 0x0000 0 0/0/0
Router-1#
Dec 19 16:32:31.102: %CLNS-4-LSP_MAXSEQ: ISIS: attempt to exceed LSP maximum sequence number for LSP Router-1.2B-00
Dec 19 16:33:01.103: %CLNS-4-LSP_MAXSEQ: ISIS: attempt to exceed LSP maximum sequence number for LSP Router-1.2B-00
Dec 19 16:33:31.103: %CLNS-4-LSP_MAXSEQ: ISIS: attempt to exceed LSP maximum sequence number for LSP Router-1.2B-00
Dec 19 16:34:01.103: %CLNS-4-LSP_MAXSEQ: ISIS: attempt to exceed LSP maximum sequence number for LSP Router-1.2B-00
BR://
SK
