ISR 4K IOS-XE: ip dhcp class xxx : missing option xx

[jean1]

Hello,

Why this command isn't avalaible on ISR 4K - IOS-XE vs IOS ?

     option 60 hex xxxxxxx

I'am using this configuration on IOS :

ip dhcp pool DHCP-TEST-ALL
 network 192.168.1.0 255.255.255.0
 default-router 192.168.1.1
 class TEST1
  address range 192.168.1.100 192.168.1.149
 class TEST2
  address range 192.168.1.150 192.168.1.200
!
 ip dhcp class TEST1
   option 60 hex a4a3a2a1f
 !
  ip dhcp class TEST2
   option 60 hex a4a3a2a1f

and i need to migrate this on ISR 4K. I'can't use the same command with ISR4K on IOS-XE ?

Best regards

[a.alekseev]

It looks like it still have not supported.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_dhcp/configuration/xe-3s/dhcp-xe-3s-book/config-dhcp-server-xe.html#GUID-EFC706B6-50A7-45E3-A98F-7B1FFA0D2CB6

[jean1]

There is no other method to match option 60 send by my device in the dhcp server ?

[a.alekseev]

you can use "option 60 hex" in pool but not in class

[jean1]

Yes, i can use options in the pool, but it's only to send options to my clients ? not to check if this option is send by my client in BOOTP request ?