Hi guys,
I need some clarification on this:
My router shows license info as below output (ISR4351k9). This router is used for normal routing out internet traffic.
Shouldn't the basic ipbasek9 be stated as "permanent" instead of "None"?
The "SL-4350-IPB-K9" was part of the item that we ordered.
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None None None
uck9 None None None
securityk9 securityk9 EvalRightToUse securityk9
ipbase ipbasek9 None ipbasek9
Router#sh license feature
Feature name Enforcement Evaluation Subscription Enabled RightToUse
appxk9 yes yes no no yes
uck9 yes yes no no yes
securityk9 yes yes no no yes
ipbasek9 no no no no no
FoundationSuiteK9 yes yes no no yes
AdvUCSuiteK9 yes yes no no yes
cme-srst yes yes no no yes
hseck9 yes no no no no
throughput yes yes no no yes
internal_service yes no no no no
Index 3 Feature: securityk9
Period left: 8 weeks 3 days
Period Used: 17 hours 36 minutes
License Type: EvalRightToUse
License State: Active, In Use
License Count: Non-Counted
License Priority: Low
Index 4 Feature: ipbasek9
Index 5 Feature: FoundationSuiteK9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
Index 6 Feature: AdvUCSuiteK9
Period left: Not Activated
Period Used: 0 minute 0 second
License Type: EvalRightToUse
License State: Active, Not in Use, EULA not accepted
License Count: Non-Counted
License Priority: None
What we ordered:
| ISR4351/K9 | - | Cisco ISR 4351 (3GE,3NIM,2SM,4G FLASH,4G DRAM,IPB) |
| CON-SSSNT-ISR4351K | - | SOLN SUPP 8X5XNBD Cisco ISR 4351 (3GE3NIM2SM4G FLASH4G D |
| SL-4350-IPB-K9 | - | IP Base License for Cisco ISR 4350 Series |
| | | |
| PWR-4450-AC | - | AC Power Supply for Cisco ISR 4450 and ISR4350 |
| CAB-3P-JPN | - | AC Power Cord, C13, 3 Prong Plug, 2.3M |
| MEM-FLSH-4G | - | 4G Flash Memory for Cisco ISR 4300 (Soldered on motherboard) |
| POE-COVER-4450 | - | Cover for empty POE slot on Cisco ISR 4450 |
| MEM-43-4G | - | 4G DRAM (1 x 4G) for Cisco ISR 4300 |
| NIM-BLANK | - | Blank faceplate for NIM slot on Cisco ISR 4400 |
| SM-S-BLANK | - | Removable faceplate for SM slot on Cisco 2900,3900,4400 ISR |
| SISR4300UK9-1612 | - | Cisco ISR 4300 Series IOS XE Universal |
