07-04-2013 06:08 AM - edited 03-04-2019 08:22 PM
Hello,
I've an issue for authentication on my internet provider with my Cisco's router.
My config is:
interface FastEthernet1
description ONT
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface Dialer1
ip address 86.204.1.184 255.255.255.0
no ip unreachables
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname fti/*****
ppp chap password 0 *****
ppp chap splitnames
ppp pap sent-username fti/***** password 0 *****
ppp ipcp dns request accept
ppp ipcp address accept
!
ip classless
ip route 0.0.0.0 0.0.0.0 86.204.1.1
And logs events is this:
*Mar 1 03:59:32.707: Sending PADI: Interface = FastEthernet1
*Mar 1 03:59:32.707: padi timer expired
*Mar 1 04:00:04.963: Sending PADI: Interface = FastEthernet1
*Mar 1 04:00:04.963: padi timer expired
*Mar 1 04:00:37.219: Sending PADI: Interface = FastEthernet1
*Mar 1 04:00:37.219: padi timer expired
*Mar 1 04:01:09.475: Sending PADI: Interface = FastEthernet1
*Mar 1 04:01:09.475: padi timer expired
If I connect directly my PC in front of internet access, with PPPOE connection by Windows, all works fine.
Could you please help me about this ?
Thanks and regards,
07-04-2013 06:13 AM
07-04-2013 06:23 AM
Hi sandeepchoudhary21,
Thanks to answer.
Unfortunately, I already looking on this link, and few commands doesn't work with me...
For example:
debug vpdn pppoe-events
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide