Layer 3 from vlan to port

[admin28373]

Hi

I am trying to get my head around layer 3 switch routing and am missing the link between vlans and ports.

I'm configuring layer 3 with SVIs.

My switch is an SG250-08HP.  I have exec  IP routing.

I have added a vlan 10,20 with no shutdown and the switches GE1 ingress to the router set with tagged 1,10,20

So executed.

interface vlan 10
name Office
no shutdown
ip address 192.168.10.4 255.255.255.0
!
interface vlan 20
name Geek
no shutdown
ip address 192.168.20.4 255.255.255.0
!

I have an Access port interface that is an SVI as no switchport.

interface GigabitEthernet6
no switchport
!

But how does this port get the association with the intended vlan, say 20?

[Georg Pauwen]

@balaji.bandi 

This is a good example of what I mean with the timestamps. You post the exact same information I did earlier, which can only mean that my post was not visible to you when you posted your reply. 

[balaji.bandi]

I may be thinking that - while i was in reply the post - you may be doing the same time you reply too another side, so when we addressing reply to OP, we may not see each other reply until we press reply.