10-07-2011 04:01 AM - edited 03-04-2019 01:51 PM
Hi Experts,
Please find topology attached.we have 1 MPLS line and 1 Site to Site VPN (as backup) connected from head office to branch office
and conditions are,
10-07-2011 04:43 AM
Hi,
1)create an ip sla object for pinging 172.16.24.2
ip sla 1
icmpecho 172.16.24.2
frequency 5
timeout 100
ip sla schedule 1 life forever start now
2) create a track object tracking the sla object
track 10 rtr 1 reachability
3) create a static route
ip route 0.0.0.0 0.0.0.0
4) create a backup floating static route
ip route 0.0.0.0 0.0.0.0 10.10.10.2 10
Regards.
Alain
10-07-2011 04:48 AM
thnkx Cadet,
I already did IP SLA,but it is for only failover for link. I want to do this on link latency. i.e if ping latency of mpls link goes more than 100 then it should route al the traffice thorugh site to site VPn.
Regards
Pawan
10-07-2011 05:38 AM
Hi,
You could use Pfr.
http://www.cisco.com/en/US/docs/ios-xml/ios/pfr/configuration/15-1mt/pfr-15-1mt-book.html
Regards.
Alain.
10-07-2011 09:42 PM
Hi Alain,
Please tell me rough guide for pfr...and also tell me on which cisco exam contain its detail information...
pawan
10-08-2011 11:33 AM
hi Pawan,
as always first comes CCO - http://www.cisco.com/en/US/docs/ios-xml/ios/pfr/configuration/15-1mt/pfr-15-1mt-book.pdf
then this community - https://supportforums.cisco.com/docs/DOC-8353 , https://supportforums.cisco.com/docs/DOC-16328
as for exams, the last I've heard was current CCIE RS lab.
HTH,
Ivan.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide