08-13-2013 03:49 AM - edited 03-04-2019 08:44 PM
Hi,
I have 2 ADSL links and i need to make a load balancing tecnology with these links. Is this possible with OSPF?
If yes plese help me to set up the routers.
08-13-2013 04:22 AM
Hi,
I think you need give bit more information before anyone can make suggestion. Where do the DSL links connect to? What devices are behind the DSL router? Are you running OSPF inside?
HTH,
Lei Tian
Sent from Cisco Technical Support iPhone App
08-13-2013 09:36 PM
Hi,
the ADSL links were connected to a cisco 871 routers and then one uplink is going to a switch because we cant plug the both uplinks to the switch the other link is not using so i hope to put a cisco 1841 router inbetween the 871 and the switch so I need to make a load balancing using the cisco 1841 is this possible?
Because I need to use the both links.
08-13-2013 06:40 AM
Load sharing or load balancing....?
08-14-2013 02:41 AM
load balancing
08-13-2013 08:58 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
As long as OSPF "sees" multiple paths with same cost, OSPF will equal cost load balance. Kind of physical media doesn't matter.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide