About sabeshkhan

sabeshkhan · 08-20-2013

Hi,I have two broadband connections from different internet service providers and I dont have a static ip.I thought to use cisco 1841 for these connections because Cisco 1841 has two wan ports.If anyone knows how to configure this with 1841 ( I have ...

sabeshkhan · 08-13-2013

Hi I have 2 ADSL links and I need to implement a load balancing system between these links. Does any one know how to do this?

sabeshkhan · 08-13-2013

Hi,I have 2 ADSL links and i need to make a load balancing tecnology with these links. Is this possible with OSPF?If yes plese help me to set up the routers.

sabeshkhan · 09-18-2013

Hi,Thanks for your replay.I will try this and let you know Thanks again.

sabeshkhan · 09-16-2013

Hi thanks for your help,One more thing I have to ask,Is failover will work with this configurations? because that's why I placed two different static routes with different AD. if not help me to config a failover with this 1841 router....please help m...

sabeshkhan · 09-02-2013

Hi, Thanks a lot for your reply.So the remain commands are correct right?I need only chnge in NAT overload right?

sabeshkhan · 09-02-2013

Hi,thanks for your reply againI tried use both pppoe connections.If I use this configuration is the dialer 2 interface works as a failover?is this configuration is correct?if any thing wrong please help me.Router(config)#int vlan 1Router(config-if)#i...

sabeshkhan · 08-21-2013

Hi,Thank you for your answer.this is only for a single port I need to use the both WAN ports with two different connections is this is possible? I have a HWIC card with my router so I hope to out the both connections via the HWIC is it possible?If ye...

Member Since	‎08-13-2013 02:59 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	11

User Statistics

User Activity

Cisco 1841 config

OSPF load balancing with ADSL

load balancing with OSPF

Cisco 1841 config

Cisco 1841 config

Cisco 1841 config

Cisco 1841 config

Cisco 1841 config