Message: Port 'Serial0/0/0:9-Bearer Channel' is down on device

[juancarlosmartinez]

Hi guys ;

I got this message on my Cisco Prime from a remote 2911 router, the office is running fine, phone system is working. I got alerts like every 15 min the goes down and up.The message is via email.

Message: Port 'Serial0/0/0:9-Bearer Channel' is down on device

any toughts thanks

[MOHD SYAFIQ · Accepted solution]

Hi Juan,

I also face the same issue on my switch port. What TAC Engineer advice me is to :

1- configure "no snmp trap link-status" on the interface

2- re-sync the device.

Regards,

Syafiq

[juancarlosmartinez]

Hi Msyafiqnr

Thanks so much I will try that...