cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
335
Views
0
Helpful
1
Replies

MGCP Gateway - Siemens

Jose Arango
Level 1
Level 1

Hello.

I have two PRI interfaces against a siemens platform. The gateway is configured with MGCP signaling, when i try to transfer from  PSTN - Siemens to Cisco,  i lose the call but when i transfer from Cisco to Siemens it  works.

Communication Manager 7.1.3 - Siemens Hipath 4000

Thanks

Jose Luis Arango

1 Reply 1

Tim Smith
Level 4
Level 4

Hi mate..

First step I'd suggest is to check output of "debug isdn q931" on the voice gateway.

There will be a disconnect code in there.

See what it is and if it makes any sense.

When you say transfer.

Do you mean an actual call transfer?

Cheers,

Tim.

Review Cisco Networking for a $25 gift card