Here is the situation:
7606-s
12.2(33)SRE1
xconnect with MPLS encap not configuring
PE4#sh run int g2/1.828
Building configuration...
Current configuration : 65 bytes
!
interface GigabitEthernet2/1.828
encapsulation dot1Q 828
end
PE4(config)#int g 2/1.828
PE4(config-subif)#xconnect 10.10.10.130 123125 pw-class en-mpls
MPLS encap is not supported on this circuit
PE4(config-subif)#
We were able to configure it initially. Now it is giving us an error.
interface GigabitEthernet2/2
no ip address
speed 1000
!
interface GigabitEthernet2/2.3508
encapsulation dot1Q 3508
xconnect 10.10.10.133 123123 pw-class en-mpls
PE4#show module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
2 20 7600 ES+ 7600-ES+20G3C
3 20 7600 ES+ 7600-ES+20G3C
4 0 4-subslot SPA Interface Processor-400 7600-SIP-400
5 2 Route Switch Processor 720 (Active) RSP720-3C-GE
6 2 Route Switch Processor 720 (Hot) RSP720-3C-GE
anyone expereinced this?
Thanks,
Atif