cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
364
Views
0
Helpful
0
Replies

MPLS - Metro link migration from Point to point to MPLS among branch offices

spm.kannan
Level 1
Level 1

Hi,

We planned to migrate our Metro point to point links into MPLS links among our branch offices.

  • we have internet link in office 1 in metro and other states offices.
  • some of our sites will have both MPLS & P2P(backup purpose), some of our sites have P2P alone and some of the sites have MPLS alone. Do we need to bring all these in a single cloud through either BGP or the combination of BGP and EIGRP ?
  • For the places with MPLS and P2P, MPLS needs to be given priority over P2P. The traffic to be automatically routed through P2P in case of MPLS link failure.
  • Other than LAN traffic, we also need to redistribute selected Static routes. We also need to put multiple default routes pointing to different firewalls based on the location.

I have uploaded the Simplified diagram. I have also explained the diagram and our current setup above.

  • Site with Green Router have both MPLS and Point to Point
  • Site with Orange Router have only Point to Point
  • Site with Red router have only MPLS
  • Black line denotes Point to Point Link
  • Yellow line denotes MPLS Link
  • Currently we have only point to point links which are configured through EIGRP with same AS number.
  • We are going to use same router to terminate both MPLS and Point to Point.
0 Replies 0