09-22-2022 07:20 AM - last edited on 09-26-2022 11:58 PM by Translator
Hi,
I created the VRF in PE router R38 AS5610 and similarly in PE router R35 AS 6520 and I configured the MP-BGP between the routes.
PE -R38 to CE-R76----- PE-R35 to CE-R82----
configured static route and redistributed to BGP
I am not getting the BGP route (82.82.82.0) from PE-R38
R38#sh ip route vrf F-1
Routing Table: F-1
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 10.10.76.0/24 is directly connected, Ethernet0/0
L 10.10.76.2/32 is directly connected, Ethernet0/0
76.0.0.0/24 is subnetted, 1 subnets
S 76.76.76.0 [1/0] via 10.10.76.1
R38
interface Loopback0
ip address 38.38.38.38 255.255.255.255
!
interface Ethernet0/0
vrf forwarding F-1
ip address 10.10.76.2 255.255.255.0
duplex auto
!
interface Ethernet0/1
ip address 10.10.38.1 255.255.255.0
duplex auto
mpls ip
!
interface Ethernet0/2
ip address 10.10.33.1 255.255.255.0
duplex auto
mpls ip
!
interface Ethernet0/3
no ip address
shutdown
duplex auto
!
interface Ethernet1/0
no ip address
shutdown
duplex auto
!
interface Ethernet1/1
no ip address
shutdown
duplex auto
!
interface Ethernet1/2
no ip address
shutdown
duplex auto
!
interface Ethernet1/3
no ip address
shutdown
duplex auto
!
router ospf 1
router-id 37.37.37.37
network 10.10.33.0 0.0.0.255 area 0
network 10.10.38.0 0.0.0.255 area 0
network 37.37.37.0 0.0.0.0 area 0
network 38.38.38.38 0.0.0.0 area 0
!
router bgp 6510
bgp router-id 38.38.38.38
bgp log-neighbor-changes
no bgp default ipv4-unicast
neighbor 75.75.75.75 remote-as 6510
neighbor 75.75.75.75 update-source Loopback0
!
address-family vpnv4
neighbor 75.75.75.75 activate
neighbor 75.75.75.75 send-community extended
neighbor 75.75.75.75 next-hop-self
exit-address-family
!
address-family ipv4 vrf F-1
redistribute connected
redistribute static
exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf F-1 76.76.76.0 255.255.255.0 10.10.76.1
!
ipv6 ioam timestamp
!
!
mpls ldp router-id Loopback0
R75
interface Loopback0
ip address 75.75.75.75 255.255.255.255
!
interface Ethernet0/0
ip address 10.10.32.2 255.255.255.0
duplex auto
mpls ip
!
interface Ethernet0/1
ip address 10.10.75.1 255.255.255.0
duplex auto
mpls ip
!
interface Ethernet0/2
ip address 10.75.75.1 255.255.255.0
duplex auto
mpls bgp forwarding
!
interface Ethernet0/3
no ip address
shutdown
duplex auto
!
router ospf 1
router-id 75.75.75.75
network 10.10.32.0 0.0.0.255 area 0
network 10.10.75.0 0.0.0.255 area 0
network 75.75.75.75 0.0.0.0 area 0
network 75.75.75.0 0.0.0.255 area 0
!
router bgp 6510
bgp router-id 75.75.75.75
bgp log-neighbor-changes
no bgp default ipv4-unicast
no bgp default route-target filter
neighbor 10.75.75.2 remote-as 6520
neighbor 38.38.38.38 remote-as 6510
neighbor 38.38.38.38 update-source Loopback0
!
address-family vpnv4
neighbor 10.75.75.2 activate
neighbor 10.75.75.2 send-community extended
neighbor 38.38.38.38 activate
neighbor 38.38.38.38 send-community extended
neighbor 38.38.38.38 next-hop-self
exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
ipv6 ioam timestamp
!
!
mpls ldp router-id Loopback0
R37
interface Loopback0
ip address 37.37.37.37 255.255.255.255
!
interface Ethernet0/0
ip address 10.10.37.1 255.255.255.0
duplex auto
mpls ip
!
interface Ethernet0/1
ip address 10.10.78.1 255.255.255.0
duplex auto
mpls ip
!
interface Ethernet0/2
ip address 10.75.75.2 255.255.255.0
duplex auto
mpls bgp forwarding
!
interface Ethernet0/3
no ip address
shutdown
duplex auto
!
router ospf 1
router-id 37.37.37.37
network 10.10.37.0 0.0.0.255 area 0
network 10.10.78.0 0.0.0.255 area 0
network 37.37.37.37 0.0.0.0 area 0
!
router bgp 6520
bgp router-id 37.37.37.37
bgp log-neighbor-changes
no bgp default ipv4-unicast
no bgp default route-target filter
neighbor 10.75.75.1 remote-as 6510
neighbor 35.35.35.35 remote-as 6520
neighbor 35.35.35.35 update-source Loopback0
!
address-family vpnv4
neighbor 10.75.75.1 activate
neighbor 10.75.75.1 send-community extended
neighbor 35.35.35.35 activate
neighbor 35.35.35.35 send-community extended
neighbor 35.35.35.35 next-hop-self
exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
ipv6 ioam timestamp
!
!
mpls ldp router-id Loopback0
R35
interface Loopback0
ip address 35.35.35.35 255.255.255.255
!
interface Ethernet0/0
ip address 10.10.34.2 255.255.255.0
duplex auto
mpls ip
!
interface Ethernet0/1
ip address 10.10.35.1 255.255.255.0
duplex auto
mpls ip
!
interface Ethernet0/2
vrf forwarding F-2
ip address 10.10.82.1 255.255.255.0
duplex auto
!
interface Ethernet0/3
no ip address
shutdown
duplex auto
!
interface Ethernet1/0
no ip address
shutdown
duplex auto
!
interface Ethernet1/1
no ip address
shutdown
duplex auto
!
interface Ethernet1/2
no ip address
shutdown
duplex auto
!
interface Ethernet1/3
no ip address
shutdown
duplex auto
!
router ospf 1
router-id 35.35.35.35
network 10.10.34.0 0.0.0.255 area 0
network 10.10.35.0 0.0.0.255 area 0
network 35.35.35.35 0.0.0.0 area 0
!
router bgp 6520
bgp router-id 35.35.35.35
bgp log-neighbor-changes
no bgp default ipv4-unicast
neighbor 37.37.37.37 remote-as 6520
neighbor 37.37.37.37 update-source Loopback0
!
address-family vpnv4
neighbor 37.37.37.37 activate
neighbor 37.37.37.37 send-community extended
neighbor 37.37.37.37 next-hop-self
exit-address-family
!
address-family ipv4 vrf F-2
redistribute connected
redistribute static
exit-address-family
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route vrf F-2 82.82.82.0 255.255.255.0 10.10.82.2
!
ipv6 ioam timestamp
!
!
mpls ldp router-id Loopback0
!
control-plane
Solved! Go to Solution.
09-23-2022 06:20 AM - last edited on 09-27-2022 12:53 AM by Translator
Gr8 ...I am able to see the BGP routes. what could be the issue
R35#sh ip route vrf F-2
Routing Table: F-2
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
a - application route
+ - replicated route, % - next hop override, p - overrides from PfR
Gateway of last resort is not set
10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
B 10.10.76.0/24 [200/0] via 37.37.37.37, 00:01:54
C 10.10.82.0/24 is directly connected, Ethernet0/2
L 10.10.82.1/32 is directly connected, Ethernet0/2
76.0.0.0/24 is subnetted, 1 subnets
B 76.76.76.0 [200/0] via 37.37.37.37, 00:01:54
82.0.0.0/24 is subnetted, 1 subnets
S 82.82.82.0 [1/0] via 10.10.82.2
09-23-2022 06:38 AM - last edited on 09-27-2022 12:55 AM by Translator
Your config was prefect,
only the router-id change
and as @Harold Ritter mention you add some command in VRF
NOW we need to force the BGP to accept the new change
and
clear ip bgp
and no bgp default route-target filter
do force the BGP to elect the best path and advertise it.
09-23-2022 06:53 AM - last edited on 09-27-2022 12:56 AM by Translator
Hi @MHM Cisco World ,
Just applying the
address-family ipv4 vrf F-1
in the PE was sufficient. There is no need to clear bgp in this case.
Regards,
09-23-2022 06:46 AM - last edited on 09-27-2022 12:58 AM by Translator
Hi @R Manjunatha ,
The issue was due to the missing
address-family vrf F-1
under BGP as per config you posted before.
R35(config-vrf)#do sh run vrf
Building configuration...
Current configuration : 284 bytes
vrf definition F-2
rd 100:1
route-target export 100:1
route-target import 100:1
!
address-family ipv4
exit-address-family
!
!
interface Ethernet0/2
vrf forwarding F-2
ip address 10.10.82.1 255.255.255.0
duplex auto
!
ip route vrf F-2 82.82.82.0 255.255.255.0 10.10.82.2
end
Regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide