Multi-link PPP questions- 2nd try

[amit-singh]

Hi,

Can I use MPPP with a high speed interface along with a slow speed connections. For example, ISDN/PRI and BRI,

E1/T1 interface with ISDN Bri, E1/T1 with ISDN PRI

TIA

-amit singh

[Kevin Dorrell]

Yes you can. In fact, it is not really correct to regard PRI as high speed and BRI as low speed. They are both collections of low speed (64kbps) channels. Its just that a BRI has 2 such channels per bundle, and PRI has 30. (OK, 23 if you happen to be in the US.)

Kevin Dorrell

Luxembourg

[amit-singh]

Thanks Kevin, for your reply.Can I use a dial-up async link along with ISDN pri for MPPP also.

TIA,

-amit singh

[Kevin Dorrell]

I've not done it myself, but I don't see any reason why not. If you define a dialer profile interface, and then make the BRI, the PRI, and the async all part of the same dialer pool, I think it should work. I'm not sure what priority order it would use the channels though - can anyone help us on that?

Kevin Dorrell

Luxembourg