cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2521
Views
0
Helpful
16
Replies

Multicast Issue with NX-OS (vPC) - Even groups work - Odd groups do not work

ulrickfr2001
Level 1
Level 1

Hi everyone,

 

We are facing an issue with Multicast using PIM-SM (ASM). All devices seem to be configured correctly but the multicast streams do not work as expected. Bellow the description of the behavior using the information provided in the diagram.

 - RP IP address : 172.19.1.241

 - Receiver IP address : 172.18.66.1

 - There is vPC configured between N5Ks and N7Ks with Vlan tag

 - The interconnections are configured with HSRP (for redundancy)

 - When the IP source address is 172.19.35.5, the stream on multicast group 239.225.1.3 is received but the stream on multicast group 239.225.1.4 is not.

 - When the IP source address is 172.19.35.6 the stream on multicast group 239.225.1.4 is received but the stream on multicast group 239.225.1.3 is not.

 

Can someone help ?

Multicast.png

16 Replies 16

Hello

if you perform the interface count along the rpf if the mc traffic then if for some reason a particular I interface  isn’t allowing mc for a certain group then you should be able to identify so

 


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

What command do I need to check the mc traffic ?

Review Cisco Networking for a $25 gift card