12-11-2007 05:20 AM - edited 03-03-2019 07:52 PM
I am a beginner infact novice in configuring multilink. Can we configure multilink by utilising the serial links terminated on multiple/different routers?
12-11-2007 05:30 AM
HI Veena, [Pls RATE if HELPS]
Here is the sample configuration:
--------------------------------------
interface Multilink1
description *****MULTILINK in Mumbai*****
ip address x.x.x.x
ppp multilink
ppp multilink group 1
!
!
interface Serial0/3/0
description **CIR 1**
bandwidth 2048
ip address x.x.x.x
encapsulation ppp
ppp multilink
ppp multilink group 1
!
interface Serial0/3/1
description **CIR 2**
bandwidth 2048
ip address x.x.x.x
encapsulation ppp
ppp multilink
ppp multilink group 1
!
interface Multilink1
description *****MULTILINK in Chennai*****
ip address x.x.x.x
ppp multilink
ppp multilink group 1
!
!
interface Serial0/3/0
description **CIR 1**
bandwidth 2048
ip address x.x.x.x
encapsulation ppp
ppp multilink
ppp multilink group 1
!
interface Serial0/3/1
description **CIR 2**
bandwidth 2048
ip address x.x.x.x
encapsulation ppp
ppp multilink
ppp multilink group 1
!
PLS RATE if HELPS.
Best Regards,
Guru Prasad R
12-11-2007 06:57 AM
Hi veena,
The 1st of concept of creating multilink is that the physical interfaces to be bundled in to multilink has to terminate on a single router at both ends.
hope that clarifies.
pls rate all helpful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide