N3K-C3064TQ-10GT

[billybong]

Hi All, i have the above switch but it only shows 32 port active license in the show license

NAME: "Chassis", DESCR: "Nexus3064T Chassis"

PID: N3K-C3064TQ-10GT  , VID: V01 ,

switch# sh lic us

Feature                      Ins  Lic   Status Expiry Date Comments

                                 Count

--------------------------------------------------------------------------------

16P_UPG_PKG                   No    -   Unused             -

32P_LIC_PKG                   Yes   -   Unused Never       -

LAN_BASE_SERVICES_PKG         Yes   -   Unused Never       -

ALGO_BOOST_SERVICES_PKG       No    -   Unused             -

LAN_ENTERPRISE_SERVICES_PKG   No    -   Unused             -

--------------------------------------------------------------------------------

I have tried looking around Cisco but can't see the 16 port upgrade license for the switch

would anyone be able to confirm  i don't need a license upgrade for me to use all 48 ports

Many Thanks

Billy

[ahmedshoaib · Accepted solution]

Hi;

Please find the required information below:

N3K-C3064TQ-10GT -- Nexus 3064-T, 48 10GBase-T and 4 QSFP+ ports

Cisco Nexus 3064-T

• 48 fixed 10GBASE-T ports (can operate at 100-Mbps, 1-Gbps, and 10-Gbps speeds)
• Four fixed QSFP+ ports (each QSFP+ port can support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet)

If your Switch is Cisco Nexus 3064-32T

• 32 fixed 10GBASE-T ports (can operate at 100-Mbps, 1-Gbps, and 10-Gbps speeds)
• Four fixed QSFP+ ports (each QSFP+ port can support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet)
• Upgrade to 48 fixed 10GBASE-T and 4 QSFP+ ports by installing a 16-port upgrade license

3064-32T required 16 port below upgrade license.

N3064T-16T-UPG= -- 16 Port Upgrade License for N3064-32T

http://www.cisco.com/c/en/us/products/collateral/switches/nexus-3000-series-switches/data_sheet_c78-651097.html

Thanks & Best regards;