NAT - 2 Public IP's to 1 Internal IP

[sharathpk0912]

Hi members

How to perform a NAT on router 4321 whereby I have 2 public IPs and they need to NAT to the same Internal IP (Internal server)?

How can it be done. Give me suggestions.

Router has two WAN connections with load balancing configuration. There is an internal server that can be accessed by outside users. Need to enable RDP port.

Thanks in advance.

[Alexey Prilutskiy]

You will get an error on the router for second static NAT translation. But you can use secondary IP on the RDP server for second static NAT translation.

Here is the command for Windows-based systems to add secondary address:

netsh interface ipv4 add address