12-22-2016 10:50 PM - edited 03-05-2019 07:43 AM
Hello all,
I've just configured cisco backbone...
I tried to change Native vlan 999, 1 and etc...
Please see the attached text file and let me know how can I deal with it..?
Regards,
SK.
Solved! Go to Solution.
12-23-2016 01:22 AM
Hi
Looking at your config if changing to vlan 999 this is whats required , native vlan needs to match far side of trunk to
Create vlan 999
vlan 999
name xxxxx
Change native on the trunk to be 999
interface GigabitEthernet2/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,2,4,100,999
switchport mode trunk
switchport trunk native vlan 999
12-23-2016 01:22 AM
Hi
Looking at your config if changing to vlan 999 this is whats required , native vlan needs to match far side of trunk to
Create vlan 999
vlan 999
name xxxxx
Change native on the trunk to be 999
interface GigabitEthernet2/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,2,4,100,999
switchport mode trunk
switchport trunk native vlan 999
12-23-2016 01:29 AM
Thank you Mark,.
Maybe do I configure name equally?...
Regards,
SK.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide