Native issue... How can I deal with?

[Soon Kwan Kwon]

Hello all,

I've just configured cisco backbone...

I tried to change Native vlan 999, 1 and etc...

Please see the attached text file and let me know how can I deal with it..?

Regards,

SK.

[Mark Malone · Accepted solution]

Hi

Looking at your config if changing to vlan 999 this is whats required , native vlan needs to match far side of trunk to

Create vlan 999

vlan 999

name xxxxx

Change native on the trunk to be 999

interface GigabitEthernet2/1
 switchport trunk encapsulation dot1q
 switchport trunk allowed vlan 1,2,4,100,999
 switchport mode trunk
 switchport trunk native vlan 999

[Soon Kwan Kwon]

Thank you Mark,.

Maybe do I configure name equally?...

Regards,

SK.