Need BGP help...

[dc-csa-blr]

Dear Experts,

We are running 3 ISPs bandwidth via eBGP in our router with our own ASN and IP address.

Now our one of the  client has their own IP address and ASN from APNIC .

So now what configuration required in my router as PE for our client ASN and IP address advertise.

I also advertise our client ASN and IP address to our all ISPs PE routers, but i need also for our client their IP address first prefer our ISP-1 and second prefer ISP-2 and incase our one ISP-1 b/w goes  down that time autometic our cliet b/w work on rest of all ISPs without any outage.

PFA- Proposed BGP diagram.

Our client ASN- 12345

IP addrsss : 101.101.101.0/24

What configuration need in my router as PE for our client under BGP in my router to advertise their ip address and ASN with my all upstream provider.

[paul driver]

Hello

No sure I understand regards

We are running 3 ISPs bandwidth via eBGP in our router with our own ASN and IP address.

Now our one of the  client has their own IP address and ASN from APNIC .

Once you have peered with this client you can maniputalte  outbound traffic paths by weight or local pref and  also utilise PBR, For incoming  path manipulate  as-prending values is also applicable.

res

Paul.

Please don't forget to rate any posts that have been helpful.

Thanks.