All,
I am working on setting up a 2811 router to act as a PPPoE client for a newly installed DSL connection. I am running debug on the router and I see the PADISNT going out. I see the PADO coming back to the router. I then see the PADR leaving from the router and finally the PADS coming back from the modem. I also see Vi2 becoming bound to profile Di1. All looks good then I see the modem sending a PADT (termination) then the process repeats. Can anyone shed some light what this terminations are coming back from the modem?
Below are the debug outputs...
minrtr01#debug pppoe ev
000922: Mar 27 16:55:00.937: %DIALER-6-BIND: Interface Vi2 bound to profile Di1ent
PPPoE protocol events debugging is on
minrtr01#
000923: Mar 27 16:55:00.941: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to updebug
000924: Mar 27 16:55:03.393: PPPoE 11990: I PADT R:88e0.f3c8.ee72 L:0023.5e00.4db8 Fa0/0
000925: Mar 27 16:55:03.393: PPPoE : Shutting down client session
000926: Mar 27 16:55:03.393: [0]PPPoE 11990: O PADT R:88e0.f3c8.ee72 L:0023.5e00.4db8 Fa0/0
000927: Mar 27 16:55:03.393: %DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1pppoe
000928: Mar 27 16:55:03.397: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down pack et
PPPoE control packets debugging is on
minrtr01#
000929: Mar 27 16:55:23.553: Sending PADI: Interface = FastEthernet0/0
000930: Mar 27 16:55:23.553: pppoe_send_padi:
FF FF FF FF FF FF 00 23 5E 00 4D B8 88 63 11 09
00 00 00 0C 01 01 00 00 01 03 00 04 46 AF E4 E4 ...
000931: Mar 27 16:55:23.585: PPPoE 0: I PADO R:88e0.f3c8.ee72 L:0023.5e00.4db8 Fa0/0
00 23 5E 00 4D B8 88 E0 F3 C8 EE 72 88 63 11 07
00 00 00 40 01 02 00 1C 6D 70 6C 73 2D 64 73 6C ...
000932: Mar 27 16:55:25.601: PPPOE: we've got our pado and the pado timer went off
000933: Mar 27 16:55:25.601: OUT PADR from PPPoE Session
88 E0 F3 C8 EE 72 00 23 5E 00 4D B8 88 63 11 19
00 00 00 40 01 02 00 1C 6D 70 6C 73 2D 64 73 6C ...
000934: Mar 27 16:55:25.737: PPPoE 6073: I PADS R:88e0.f3c8.ee72 L:0023.5e00.4db8 Fa0/0
00 23 5E 00 4D B8 88 E0 F3 C8 EE 72 88 63 11 65
17 B9 00 0C 01 01 00 00 01 03 00 04 46 AF E4 E4 ...
000935: Mar 27 16:55:25.737: IN PADS from PPPoE Session
000936: Mar 27 16:55:25.741: %DIALER-6-BIND: Interface Vi2 bound to profile Di1
000937: Mar 27 16:55:25.741: PPPoE: Virtual Access interface obtained.
000938: Mar 27 16:55:25.741: PPPoE : encap string prepared
000939: Mar 27 16:55:25.741: [0]PPPoE 6073: data path set to Virtual Acess
000940: Mar 27 16:55:25.745: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to up
000941: Mar 27 16:55:28.186: PPPoE 6073: I PADT R:88e0.f3c8.ee72 L:0023.5e00.4db8 Fa0/0
00 23 5E 00 4D B8 88 E0 F3 C8 EE 72 88 63 11 A7
17 B9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
000942: Mar 27 16:55:28.190: PPPoE : Shutting down client session
000943: Mar 27 16:55:28.190: [0]PPPoE 6073: O PADT R:88e0.f3c8.ee72 L:0023.5e00.4db8 Fa0/0
88 E0 F3 C8 EE 72 00 23 5E 00 4D B8 88 63 11 A7
17 B9 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
000944: Mar 27 16:55:28.190: %DIALER-6-UNBIND: Interface Vi2 unbound from profile Di1
000945: Mar 27 16:55:28.194: %LINK-3-UPDOWN: Interface Virtual-Access2, changed state to down
Adil
