cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
113
Views
0
Helpful
0
Replies
Highlighted
Beginner

Need to Allow a VLAN into a VRF

Need to Allow a VLAN into a VRF

 

The vlan has a SVI and I would like to get only this vlan or network into our VRF 500 so that everyone on said vlan can reach everything that VRF 500 can reach. We have a core switch that the SVI and VRF 500 exist on so I am trying to do some magic on this switch.

 

I thought I could so something like this below but I think this would only allow everyone in the VRF to reach the global routing table which is not what we need.

 

 

interface Vlan10
 description TEST
 ip address 10.1.10.1 255.255.255.0


 access-list 50 permit ip 172.17.0.0 0.0.255.255 10.1.10.0 0.0.0.255
!
route-map VRF_TO_GLOBAL permit 10
 match ip address 50
set global
!


interface Vlan500
 description VRF500
 ip vrf forwarding 500
 ip address 172.17.65.65 255.255.255.192
ip policy route-map VRF_TO_GLOBAL

Apologies if I am missing something obvious here. VRFs and what I am trying to do is very new to me. Any help would be greatly appreciated. Thank you!

 

0 REPLIES 0