07-24-2019 10:59 PM - edited 07-25-2019 12:28 AM
Hi Team,
I have deployed CISCO CSR1000v on Open stack cloud in that i am having 2 interfaces in that i am able to ping the one .interface ip from outside not from other interface ip from outside.
giga1=192.168.100.18 and giga2-10.205.59.20
in that i am able to ping 100.18 and not able to ping 59 20 as configured on same router.Kindly help to reach the same.
Not able to activate the virtual service as well.as the virtual service list is showing activation failed.
Regards
Athi
07-25-2019 01:32 AM
Hello,
I am not an OpenStack guru, but as I understand it, you can actually only manage, and reach, the CSR1000v through the management interface, which is GigabitEthernet1.
That said, can you post the running configuration, as well as a couple of screenshots that shows where the activation fails ?
07-25-2019 02:25 AM
07-25-2019 04:50 AM
Hello,
what happens when you activate ? What message do you get ?
interface GigabitEthernet3
ip address 10.205.58.228 255.255.254.0
!
interface VirtualPortGroup0
ip unnumbered GigabitEthernet3
!
virtual-service csr_mgmt
vnic gateway VirtualPortGroup0
guest ip address 10.205.58.228
activate
!
ip route 10.205.58.228 255.255.255.255 VirtualPortGroup0
!
onep
service set vty
07-25-2019 10:11 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide