04-27-2010 09:30 PM - edited 03-04-2019 08:18 AM
Hi Everyone,
I have a cisco router 1721 with 3 ethernet connection. 1 for LAN. 2 for Wan (Both with static ip address). Can someone help me? I have most of it program, but missing some commands. Here is what I have. Please Help!
ip name-server 216.16.193.251
ip name-server 216.16.195.2
ip dhcp excluded-address 192.168.150.1 192.168.150.149
ip dhcp excluded-address 192.168.150.181 192.168.150.254
!
ip dhcp pool test
network 192.168.150.0 255.255.255.0
domain-name bcs-ip.net
dns-server 192.168.150.248 192.168.150.249
default-router 192.168.150.254
lease 7
!
ip cef
!
!
!
!
interface Ethernet0
description att dsl
ip address 99.99.xx.xx 255.255.255.248
ip nat outside
half-duplex
!
interface Ethernet1
description cable Internet
ip address 98.98.xx.xx 255.255.255.248
ip nat outside
half-duplex
!
interface FastEthernet0
description cisco test lan
ip address 192.168.150.254 255.255.255.0
ip nat inside
speed auto
half-duplex
!
router rip
network 99.0.0.0
network 98.98.0.0
network 216.16.200.0
!
ip default-gateway 99.99.x.x
ip nat inside source list 1 interface Ethernet0 overload
ip nat inside source list 2 interface Ethernet1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 99.x.x.x
no ip http server
!
access-list 1 permit 192.168.150.0 0.0.0.255
access-list 2 permit 192.168.150.0 0.0.0.255
banner motd ^CDO NOT MESS WITH THIS ROUTER UNLESS YOU KNOW WHAT THE HELL YOU ARE
DOING AND THAT YOU ARE AN EMPLOYER OF CISCO TEST^C
!
line con 0
password XXX
login local
transport preferred none
line aux 0
password XXX
login local
transport preferred none
line vty 0 4
password XXX
login local
transport preferred none
!
no scheduler allocate
!
end
ciscotest#
04-28-2010 03:31 AM
Hi Everyone,
I have a cisco router 1721 with 3 ethernet connection. 1 for LAN. 2 for Wan (Both with static ip address). Can someone help me? I have most of it program, but missing some commands. Here is what I have. Please Help!
ip name-server 216.16.193.251
ip name-server 216.16.195.2
ip dhcp excluded-address 192.168.150.1 192.168.150.149
ip dhcp excluded-address 192.168.150.181 192.168.150.254
!
ip dhcp pool test
network 192.168.150.0 255.255.255.0
domain-name bcs-ip.net
dns-server 192.168.150.248 192.168.150.249
default-router 192.168.150.254
lease 7
!
ip cef
!
!
!
!
interface Ethernet0
description att dsl
ip address 99.99.xx.xx 255.255.255.248
ip nat outside
half-duplex
!
interface Ethernet1
description cable Internet
ip address 98.98.xx.xx 255.255.255.248
ip nat outside
half-duplex
!
interface FastEthernet0
description cisco test lan
ip address 192.168.150.254 255.255.255
Hi,
For your requirement check out the below link for IOS nat load balancing for ISP
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml
Hope to Help !!
Ganesh.H
Remember to rate the helpful post
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide