12-02-2013 11:38 PM - edited 03-04-2019 09:44 PM
Hi All,
We want to start using Netflow to monitor traffic and wonder how to find out if our access switches ie a mix of 3750s and 2960s can handle
NetFlow and is there a template or sample configuration we can use.
Any help is much appreciated.
Thanks
Ql
12-03-2013 12:29 AM
You need a 3750-X with a service module for Netflow suppport.
The 2960 does not support Netflow that I am aware of.
Daniel Dib
CCIE #37149
12-03-2013 12:45 AM
Daniel,
Is it correct that you need IPservice IOS to have NetFlow?
Can we run it from our Nexus 7000 core since our access switch are older gen 3750.
Cheers,
QL
12-03-2013 01:39 AM
Hi,
Netflow lite for 2960-x : http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/solution_overview_c22-728776.html
For Nexus7000 series
http://www.cisco.com/en/US/products/ps9402/products_configuration_example09186a0080b5a945.shtml
Regards,
Sathvik
12-04-2013 12:12 AM
Thank you for all the info
will try to config Netflow on the Nexus Vlan interfaces.
Thanks
Qle
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide