Hi All,
I've recently received this new Cisco 1921 routers with Cisco CP loaded, so it comes up with the annoying change username and password at first access. I've removed all of those files from the flash memory, and rebooted it, and it came up with the proper initial configuration dialog, which is what I wanted.
But, whenever I configure the router with a set of basic configuration, like interface, routing, and snmp loggings, and hit wr mem, it doesn't display at all when I do "sh run". It's weird cause when I do sh run | sec rip or any other stuff that I have configured, it shows up , but not in sh run at all.
What's the deal with the new routers??? Even sh version doesn't show the config-register or memory allocation details. Which is weird!
xxxxx#sh ver
Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 20-Mar-12 17:58 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)
xxxxxx uptime is 6 minutes
System returned to ROM by reload at 06:39:25 UTC Mon Apr 29 2013
System restarted at 06:40:59 UTC Mon Apr 29 2013
System image file is "usbflash0:c1900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
==================================================================
xxxxx#sh run
Building configuration...
Current configuration : 1930 bytes
!
! Last configuration change at 06:42:46 UTC Mon Apr 29 2013
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname xxxxxx
!
boot-start-marker
boot-end-marker
!
!
logging userinfo
logging buffered 4096
!
no aaa new-model
!
no ipv6 cef
ip source-route
ip cef
xxxxxxx #sh run | sec rip
router rip
version 2
network 172.17.0.0
network 192.168.10.0
network 192.168.13.0
no auto-summary
xxxxxxx#sh license feature
Feature name Enforcement Evaluation Subscription Enabled RightToUse
ipbasek9 no no no yes no
securityk9 yes yes no no yes
datak9 yes yes no no yes
SSL_VPN yes yes no no yes
ios-ips-update yes yes yes no yes
WAAS_Express yes yes no no yes