Nexus 9300 Sensor fail Heavenly vrm(5)

[TommyNilsson0342]

How do I replace the sensor that is broken?

Is it a module or is the entire switch?

fault code f0449

topology/pod-1/node-111/sys/ch/subslot-1/sup/sensor-5

Temperature:

-----------------------------------------------------------------------------------
Module Sensor MajorThresh MinorThres CurTemp Status
(Celsius) (Celsius) (Celsius)
-----------------------------------------------------------------------------------
1 Inlet(1) 70 42 26 normal
1 outlet(2) 80 70 62 normal
1 x86 processor(3) 90 80 41 normal
1 Heavenly(4) 110 90 55 normal
1 Heavenly vrm(5) 120 110 N/A fail

[marce1000]

 - Ref : https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/syslog/guide/b_ACI_System_Messages_Guide/m-aci-f0x-messages.html

 >...

                       F0449: fltEqptSensorFailed

Severity: major

Explanation: This fault usually occurs if sensor fails

Recommended Action: If you see this fault, take the following actions:

1. replace the component that has failed
2. If the above actions did not resolve the issue, create a show tech-support file and contact Cisco TAC.