NIM-8CE1T1-PRI reload by NGIO control packet loss detected on ISR4351
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-04-2016 02:12 PM - edited 03-05-2019 07:36 AM
Hi All,
I have ISR4351, with card NIM-8CE1T1-PRI.
Pinging through the E1 link 0/1/7 (ser0/1/7:0) to next hop 1.1.1.2 make the module NIM-8CE1T1-PRI reloading???
See the steps of reproducing the problem.
Configuration below:
Tanks for your valuable help.
==============================
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no platform punt-keepalive disable-kernel-core
!
hostname R4351
!
boot-start-marker
boot system bootflash:isr4300-universalk9.03.17.03.S.156-1.S3-std.SPA.bin
boot system bootflash:isr4300-universalk9.16.03.02.SPA.bin
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
card type e1 0 1
card type e1 0 2
enable secret 5 $1$fUKp$98WodmT7cxxwIU8Qd9zDn/
!
no aaa new-model
!
subscriber templating
!
!
multilink bundle-name authenticated
!
!
spanning-tree extend system-id
!
username cisco privilege 15 password 0 cisco
!
redundancy
mode none
!
controller E1 0/1/0
!
controller E1 0/1/1
!
controller E1 0/1/2
!
controller E1 0/1/3
!
controller E1 0/1/4
!
controller E1 0/1/5
!
controller E1 0/1/6
!
controller E1 0/1/7
framing no-crc4
clock source line primary
channel-group 0 timeslots 1-31
logging-events detail
!
controller E1 0/2/0
!
controller E1 0/2/1
!
controller E1 0/2/2
!
controller E1 0/2/3
!
controller E1 0/2/4
!
controller E1 0/2/5
!
controller E1 0/2/6
!
controller E1 0/2/7
framing no-crc4
clock source line secondary
channel-group 0 timeslots 1-31
!
!
vlan internal allocation policy ascending
!
interface GigabitEthernet0/0/0
no ip address
negotiation auto
!
interface GigabitEthernet0/0/1
no ip address
negotiation auto
!
interface GigabitEthernet0/0/2
no ip address
negotiation auto
!
interface Serial0/1/7:0
ip address 1.1.1.1 255.255.255.0
encapsulation ppp
load-interval 30
!
interface Serial0/2/7:0
ip address 1.1.1.2 255.255.255.0
encapsulation ppp
load-interval 30
!
interface GigabitEthernet0
vrf forwarding Mgmt-intf
ip address 192.168.10.51 255.255.255.0
negotiation auto
!
interface Vlan1
no ip address
!
ip forward-protocol nd
ip http server
ip http secure-server
!
control-plane
!
!
line con 0
stopbits 1
line aux 0
stopbits 1
line vty 0 4
password cisco
login
line vty 5 15
password cisco
login
!
network-clock revertive
network-clock synchronization automatic
network-clock input-source 250 controller E1 0/1/7
!
end
R4351#
=======================
=============================================================
R4351#ping 1.1.1.2 repeat 10000
Type escape sequence to abort.
Sending 10000, 100-byte ICMP Echos to 1.1.1.2, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!.......
*Dec 4 22:18:51.290: %IOMD-3-MODULE_MESSAGE: SIP2: iomd: NIM-8CE1T1-PRI[0/1] NGIO control packet loss detected: module reloading.....
*Dec 4 22:19:02.300: %SPA_OIR-3-RECOVERY_RELOAD: subslot 0/1: Attempting recovery by reloading SPA.
*Dec 4 22:19:02.303: %SPA_OIR-6-OFFLINECARD: SPA (NIM-8CE1T1-PRI) offline in subslot 0/1
*Dec 4 22:19:02.601: %NETCLK-6-SRC_UPD: Synchronization source E1 0/1/7 status (Signal Failure) is posted to all selection process....
*Dec 4 22:19:09.356: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/7:0, changed state to down
*Dec 4 22:19:09.356: %LINK-3-UPDOWN: Interface Serial0/1/7:0, changed state to down................
Success rate is 99 percent (4909/4941), round-trip min/avg/max = 3/3/29 ms
R4351#
R4351#
*Dec 4 22:20:07.467: %SPA_OIR-6-ONLINECARD: SPA (NIM-8CE1T1-PRI) online in subslot 0/1
*Dec 4 22:20:23.530: %CONTROLLER-5-UPDOWN: Controller E1 0/1/7, changed state to up
*Dec 4 22:20:25.531: %LINK-3-UPDOWN: Interface Serial0/1/7:0, changed state to up
*Dec 4 22:20:25.559: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/7:0, changed state to up
R4351#
- Labels:
-
Other Routing
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
12-04-2016 02:14 PM
additional information on the problem (sh ver + sh platform):
R4351#sh ver
Cisco IOS XE Software, Version 03.17.03.S - Standard Support Release
Cisco IOS Software, ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.6(1)S3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Mon 21-Nov-16 18:07 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2016 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
R4351 uptime is 3 hours, 16 minutes
Uptime for this control processor is 3 hours, 17 minutes
System returned to ROM by reload
System image file is "bootflash:isr4300-universalk9.03.17.03.S.156-1.S3-std.SPA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Suite License Information for Module:'esg'
--------------------------------------------------------------------------------
Suite Suite Current Type Suite Next reboot
--------------------------------------------------------------------------------
FoundationSuiteK9 None None None
securityk9
appxk9
AdvUCSuiteK9 None None None
uck9
cme-srst
cube
Technology Package License Information:
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
appxk9 None None None
uck9 None None None
securityk9 None None None
ipbase ipbasek9 Permanent ipbasek9
cisco ISR4351/K9 (2RU) processor with 1646117K/6147K bytes of memory.
Processor board ID FDO1952A0JG
3 Gigabit Ethernet interfaces
2 Serial interfaces
16 Channelized E1/PRI ports
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
3207167K bytes of flash memory at bootflash:.
Configuration register is 0x2102
R4351#sh plat
R4351#sh platform
Chassis type: ISR4351/K9
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 ISR4351/K9 ok 03:17:15
0/0 ISR4351-3x1GE ok 03:16:13
0/1 NIM-8CE1T1-PRI ok 00:05:06
0/2 NIM-8MFT-T1/E1 ok 03:14:36
1 ISR4351/K9 ok 03:17:15
2 ISR4351/K9 ok 03:17:15
R0 ISR4351/K9 ok, active 03:17:15
F0 ISR4351/K9 ok, active 03:17:15
P0 PWR-4450-AC ok 03:16:54
P2 ACS-4450-FANASSY ok 03:16:54
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 15030325 16.2(2r)
1 15030325 16.2(2r)
2 15030325 16.2(2r)
R0 15030325 16.2(2r)
F0 15030325 16.2(2r)
R4351#
