10-18-2005 01:00 PM - edited 03-03-2019 10:45 AM
Dear Friends,
We are having a STM1 - 155 Mbps link to our provider.
Now I am able to extended ping but not standard ping .
Atul
10-18-2005 07:48 PM
More info is required....what parameters are you changing in the extended ping to make it work? What do the configs for each side of the link look like?
10-18-2005 11:24 PM
KUIX_2#ping www.yahoo.com
Translating "www.yahoo.com"...domain server (82.145.192.66) [OK]
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 216.109.118.77, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
KUIX_2#ping
Protocol [ip]:
Target IP address: www.yahoo.com
Repeat count [5]: 10
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]: y
Source address or interface: 62.216.146.145
% Invalid source
Source address or interface: 62.216.146.146
Type of service [0]:
Set DF bit in IP header? [no]:
Validate reply data? [no]:
Data pattern [0xABCD]:
Loose, Strict, Record, Timestamp, Verbose[none]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 10, 100-byte ICMP Echos to 216.109.118.77, timeout is 2 seconds:
!!!!!!!!!!
Success rate is 100 percent (10/10), round-trip min/avg/max = 280/280/284 ms
KUIX_2#
10-18-2005 11:46 PM
Is it possible to show the route for yahoo.com and the config on the router if possible.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide