09-18-2018 11:09 AM
hello all,
I am having issues with a small lab setup. I am working on setting up rip with floating static routes but routing tables on both routers are no showing any L codes. I'm getting C,R, and S, but am not able to route through. are either of these issues related, and what would cause no L codes.
I'm using 1841 routers with IOS 12.4 if that makes a difference.
Solved! Go to Solution.
09-18-2018 12:32 PM - edited 09-18-2018 12:33 PM
Those type of routes were not implemented in your IOS version.
So there is another reason why it is not working.
Jon
09-18-2018 12:32 PM - edited 09-18-2018 12:33 PM
Those type of routes were not implemented in your IOS version.
So there is another reason why it is not working.
Jon
09-19-2018 12:01 PM
Jon is quite right that the 1841 router code does not implement the L (locally connected interface) route entry in the routing table. If you can not route through then there is some problem in your routing setup. Please post a diagram showing the topology of the network, the output of show ip route from each router, and a description of what does work and what does not work. Posting the router configurations would also be helpful.
HTH
Rick
09-19-2018 12:33 PM
the issue was likely a halted or frozen process. reloading the devices started routing properly.
09-19-2018 12:40 PM
Thanks for posting back and letting us know that you have it working.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide