no L codes in routing table.

[notaciscoguy]

hello all, 

I am having issues with a small lab setup. I am working on setting up rip with floating static routes but routing tables on both routers are no showing any L codes. I'm getting C,R, and S, but am not able to route through. are either of these issues related, and what would cause no L codes. 

I'm using 1841 routers with IOS 12.4 if that makes a difference. 

[Jon Marshall · Accepted solution]

Those type of routes were not implemented in your IOS version. 

So there is another reason why it is not working. 

Jon

[Richard Burts]

Jon is quite right that the 1841 router code does not implement the L (locally connected interface) route entry in the routing table. If you can not route through then there is some problem in your routing setup. Please post a diagram showing the topology of the network, the output of show ip route from each router, and a description of what does work and what does not work. Posting the router configurations would also be helpful.

HTH

Rick

[notaciscoguy]

the issue was likely a halted or frozen process. reloading the devices started routing properly. 

[Richard Burts]

Thanks for posting back and letting us know that you have it working.

HTH

Rick