cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1073
Views
0
Helpful
2
Replies
Highlighted
Participant

not advertised to any peer

I have a EIGRP route which get redistributed into bgp andhas to be advertised to MPLS cloud. this is what i  am seeing. BGP keep saying not advertised to any peer. Can anyone throw some light ?

Next hop is reachable, this is the only valid and best path...

xxxxxxxxxxx>sh ip route 10.70.8.1

Routing entry for 10.70.8.0/29

  Known via "eigrp 555", distance 90, metric 52802816, type internal

  Redistributing via bgp 65494, eigrp 555

  Advertised by bgp 65494 route-map EIGRP-to-BGP

  Last update from 10.66.246.253 on GigabitEthernet0/0, 00:00:00 ago

  Routing Descriptor Blocks:

  * 10.66.246.253, from 10.66.246.253, 00:00:00 ago, via GigabitEthernet0/0

      Route metric is 52802816, traffic share count is 1

      Total delay is 500110 microseconds, minimum bandwidth is 64 Kbit

      Reliability 255/255, minimum MTU 1440 bytes

      Loading 1/255, Hops 2

xxxxxxxx>sh ip bgp 10.70.8.1

BGP routing table entry for 10.70.8.0/29, version 489127

Paths: (1 available, best #1, table Default-IP-Routing-Table)

Flag: 0x820

  Not advertised to any peer

  Local

    10.66.246.253 from 0.0.0.0 (128.212.44.210)

      Origin incomplete, metric 52802816, localpref 100, weight 32768, valid, sourced, best

2 REPLIES 2
Highlighted
Participant

not advertised to any peer

Can you please share following outputs?

show ver | in IOS

show run | sec router bgp

show ip prot

show ip bgp nei x.x.x.x adv | in 10.70.8.0 <<<< to make sure that this is actually happening.

Highlighted
Advocate

not advertised to any peer

Hi,

how does the route-map EIGRP-to-BGP look like?

HTH,

Milan