cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1129
Views
0
Helpful
4
Replies

Number of users supported on ISRs G2

net buzz
Level 1
Level 1

Hi!

This is a feature that I have researched for by looking at ISRs G2 data sheets and cisco.com website.

The number of users that can be supported or the recommended number of users per router chassis/model is not mentioned anywhere.

However this is mentioned in the Cisco 880 ISR data sheet.

Can someone please shed some light on the number of users that can be supported or the recommended number of users on Cisco 1900/2900/3900 ISRs?

Thanks,

Alvin

2 Accepted Solutions

Accepted Solutions

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

See attachment.

View solution in original post

4 Replies 4

Lukasz Bromirski
Cisco Employee
Cisco Employee

There is no recommended limit on ISR G2s, there's limit to the number of packets/second that can be switched through the router or some specific recommendations for advanced features - like firewall sessions/second, VPN sessions and things like that.

There are thus bandwidth recommendations not user recommendations.

Small ASA (5505) was limited to the number of users (10/50/unlimited) using license.

Hi!

I have checked the ISRs data sheets but the packet forwarding rate/switching rate is not available.

I have seen same on firewalls and switches datasheets.

Is there a resource when this information is mentioned?

Regards,

Alvin

Disclaimer

The  Author of this posting offers the information contained within this  posting without consideration and with the reader's understanding that  there's no implied or expressed suitability or fitness for any purpose.  Information provided is for informational purposes only and should not  be construed as rendering professional advice of any kind. Usage of this  posting's information is solely at reader's own risk.

Liability Disclaimer

In  no event shall Author be liable for any damages whatsoever (including,  without limitation, damages for loss of use, data or profit) arising out  of the use or inability to use the posting's information even if Author  has been advised of the possibility of such damage.

Posting

See attachment.

Review Cisco Networking products for a $25 gift card