ā12-14-2022 12:04 AM - last edited on ā12-14-2022 02:48 AM by Translator
Hi..
We configure ospf on each interface like this
interface GigabitEthernet0/0/0
ip address 10.103.245.13 255.255.255.252
ip ospf network point-to-point
ip ospf 100 area 0.0.0.0
negotiation auto
interface GigabitEthernet0/0/1
ip address 10.103.246.13 255.255.255.252
ip ospf network point-to-point
ip ospf 100 area 0.0.0.0
negotiation auto
router ospf 100
router-id 10.100.100.9
==================================================================
if we change the config like this
router ospf 100
network 10.103.245.13 0.0.0.3 area 0
network 10.103.246.13 0.0.0.3 area 0
Is both config will have same result?
Solved! Go to Solution.
ā12-14-2022 12:42 AM
same result no different at all.
ā12-14-2022 12:42 AM
same result no different at all.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide