OSPF bad checksum

[mario_spendier]

Hi all!

I have a problem regarding a syslog message:

- %OSPF-4-ERRRCV: Received invalid packet: Bad Checksum from ...

We have changed the cables and the serial interfaces but no change! Does anyone know what else can be a possible fix for that. The line itself was also checked by the provider. The connection itself seems to be ok, data flow is very good!

Thanks for any help!

Mario

[pkhatri]

Mario,

There could be a number of reasons for this problem. The following document should help you troubleshoot this:

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094819.shtml

Pls do remember to rate posts.

Paresh

[spremkumar]

hi

hope this helps..

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094819.shtml#probtwo

regds