07-03-2021 09:42 AM - edited 04-14-2022 02:57 PM
07-18-2021 12:45 AM
It s a network mismatch. I was facing this issue while troubleshooting with a customer. I requested to access the PE router but the customer told me that it is under the control of the service provider. So I was forced to troubleshoot on CE router. I used the following steps above to diagnostic the issue. I decided then to write an article to share this experience.
07-04-2021 12:09 AM
It seems that the PE router have configuration nssa, maybe you could solve it with a static ip route 0.0.0.2 255.255.255.255 12.0.0.2, I remember those tansit and point-to-point labels with the areas types (stub, totally stub, nssa, totally nssa)
07-18-2021 12:45 AM
It s a network mismatch. I was facing this issue while troubleshooting with a customer. I requested to access the PE router but the customer told me that it is under the control of the service provider. So I was forced to troubleshoot on CE router. I used the following steps above to diagnostic the issue. I decided then to write an article to share this experience.
07-04-2021 12:26 AM
- FYI : https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/7112-26.html
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide