07-06-2005 02:28 AM - edited 03-03-2019 09:58 AM
Hi,
On Ospf is it possible to increase cost/distance for specific external address type5/7, without increase all the external addressees as this can be done distance ospf external xxx .
Im running Ospf and Rip with overlapping IP address hence I want to make router r3 to prefer routes from the Rip r4 for this specific address. This is so that all the request from user LAN to 10.net should via r4 and if the 10.Net is down, request is directed via r2. i have attached network diagram
Regards
07-06-2005 06:14 AM
If the number of external routes are less, you could use the following command instead.
distance
Define the routes in the ACL which you want to apply the distance.
07-06-2005 06:57 AM
Hi,
What would be the src address "ip address to be suppressed"?. ACL "Standard or extended".
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide