05-30-2005 10:59 PM - edited 03-03-2019 09:42 AM
kindly i need help in understanding the difference between: Point-to-point, point-to-multipoint, NBMA, and broadcast multi-access networks.
I am confused in both the concept and the configuration needed, can somebody help me.
Thanks in advance.
05-30-2005 11:16 PM
Here are four great documents that should help you:
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094057.shtml
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094058.shtml
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094054.shtml
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9ea.shtml
In fact, there are loads more where those came from. Have a look under the heading "Configure" in this page:
http://www.cisco.com/en/US/tech/tk365/tk480/tsd_technology_support_sub-protocol_home.html
Here is the OSPF design guide:
http://www.cisco.com/en/US/tech/tk365/technologies_white_paper09186a0080094e9e.shtml
Kevin Dorrell
Luxembourg
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community