cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
215
Views
2
Helpful
4
Replies

output anormal OSPF

ziad-chair
Level 1
Level 1

je trouve cette output anormal, que pensez vous SVP de l'état ospf dasn ce cas :
O E1 10.232.51.3/32 [110/53] via 10.4.151.2, 12:16:54, Port-channel20.1017
[110/53] via 10.4.151.2, 12:16:48, Port-channel20.1017
[110/53] via 10.4.151.2, 12:16:54, Port-channel20.1017
[110/53] via 10.4.151.2, 12:16:48, Port-channel20.1017
[110/1] via 10.4.151.2, 12:16:54, Port-channel20.1017
[110/1] via 10.4.151.2, 12:16:54, Port-channel20.1017

Merci d'avance

4 Replies 4

show ip route | include , 00:00 <<- share this please 

MHM

voilà :
sh ip route | i , 00:0
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
[110/1] via 10.4.151.2, 00:07:30, Port-channel20.1017
Merci

Friend 

This meaning there is loop in this route. 

The prefix add and then remove, can I see the topology. 

Did you use any redistribute between two IGP protocols or between two ospf processes?

Do you use any tunnel?

MHM

thank you so much brother,

"This meaning there is loop in this route. 

The prefix add and then remove"

this is what I think too, it's not for me to troubleshoot further,

Review Cisco Networking for a $25 gift card