Packt Drop in Physical Interface

[biplobkhan]

Hi

A number of my branch router is connect to Head office.

one branch is connect through Layer 2.

I show physical  interface  then found Packet drop .

But when ping HO- LAN to Branch- LAN through Computer then no ping lose.

Can you tell what is the probability problem in packet drop , what I take the step for resulation.

Configuration in Branch Router:

interface FastEthernet0/0

ip address 192.168.X.X 255.255.255.0

ip tcp adjust-mss 1460

duplex auto

speed auto

!

interface FastEthernet0/1

ip address 192.168.X.X 255.255.255.248

duplex auto

speed auto

!

ip forward-protocol nd

ip route 0.0.0.0 0.0.0.0 192.168.X.1

!

!

no ip http server

no ip http secure-server

!

!

!

regards

Biplob

[biplobkhan]

Data-Center#ping 192.168.X.X repeat 100

Type escape sequence to abort.

Sending 100, 100-byte ICMP Echos to 192.168.63.209, timeout is 2 seconds:

!!..!.!.!!!.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!.!!!!

!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!

Success rate is 92 percent (92/100), round-trip min/avg/max = 16/30/108 ms

Data-Center#