10-10-2010 05:35 AM - edited 03-04-2019 10:03 AM
hi,
i am struggling for a simple issue, i have bgp between remote & hq site, able to receive routes from hq.
ADSL is up & configured to take internet traffic from branch networks from interfaces fa0/0.40 OR fa0/0.41 & can ping google.com from branch router, but when fa0/0.40 OR fa0/0.41 is made source unable to reach internet
remote branch config is as follows
lan-side
-----------
interface FastEthernet0/0
no ip address
duplex full
speed 100
!
interface FastEthernet0/0.40
encapsulation dot1Q 40
ip address 192.168.40.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
no ip virtual-reassembly
no ip mroute-cache
no cdp enable
!
1interface FastEthernet0/0.41
encapsulation dot1Q 41
ip address 192.168.41.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
no ip virtual-reassembly
no ip mroute-cache
no cdp enable
!
interface FastEthernet0/0/0
description [INTERNET-ADSL-LINK]
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip mroute-cache
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
no cdp enable
!
interface Dialer1
description ADSL INTERNET Dialer for PPOE
ip address negotiated
no ip unreachables
ip nat outside
no ip virtual-reassembly
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap chap callin
ppp chap hostname *****
ppp chap password *******
ppp pap sent-username **** password ****
ppp ipcp dns request accept
ppp ipcp route default
ppp ipcp address accept
end
!
access-list 10 permit 192.168.40.0 0.0.0.255
dialer-list 1 protocol ip list 10
!
branch-RTR01#sh ip int brie
Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 unassigned YES NVRAM up up
FastEthernet0/0.40 192.168.40.1 YES NVRAM up up
FastEthernet0/0.41 192.168.41.1 YES NVRAM up up
FastEthernet0/0/0 unassigned YES NVRAM up up
NVI0 172.30.1.9 YES unset up up
Virtual-Access1 unassigned YES unset up up
Virtual-Access2 unassigned YES unset up up
Dialer1 83.110.248.229 YES IPCP up up
!
ip dhcp excluded-address 192.168.40.1 192.168.40.20
!
ip dhcp pool DATA
network 192.168.40.0 255.255.255.0
default-router 192.168.40.1
dns-server 213.42.20.20
!
Any idea???????
Solved! Go to Solution.
10-10-2010 07:48 AM
A ping from the router will normally be sourced from 83.110.248.229 and wouldn't need to be NAT'd. What does the NAT config look like?
10-10-2010 07:48 AM
A ping from the router will normally be sourced from 83.110.248.229 and wouldn't need to be NAT'd. What does the NAT config look like?
10-10-2010 09:37 AM
aha,
I missed the Nat'd statement, following is the one which solved my problem
ip nat inside source list 10 interface Dialer1 overload
thx man..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide