POE ports

[eng_adel273]

I some of the POE ports are not working like port gi1/0/12 .

I tried to  shutdown &  no shutdown , but also not working. as in attached file

also Checked command "show power inline " and check the used/remaining power , it was 80/750

please help

[Leo Laohoo]

Post the complete output to the following commands:
1. sh version; and
2. sh post

[eng_adel273]

Kindly find the txt file contains the result of commands

[Leo Laohoo]

2960X with 15.0(2a)EX5. Right, so if you move this device to a different port does it work or not?

[eng_adel273]

I used any ports on the switch , it is working

and some ports are not working

[Leo Laohoo]

Try upgrading the firmware first.

[Julio E. Moisa]

Hi

What is the device model?

[eng_adel273]

2960 series

[Georg Pauwen]

Hello,

make sure that 'power inline never' is not configured on the ports that are not working. You can also try to set the power consumption manually:

interface GigabitEthernet1/0/12

power inline consumption 7000

In addition, post the output of:

debug ilpower port

debug ilpower powerman

[eng_adel273]

kindly find the attached  results

Port 34 is not working POE

[Leo Laohoo]

Post the complete output to the command "sh interface Gi1/0/34 controll".

[eng_adel273]

Kindly find the attached result as you request

[Leo Laohoo]

If it works on any other port, port 34 could be faulty. You might want to contact TAC and organize an RMA.

[eng_adel273]

I have Many Ports ( 10 Ports )  Like that

[Leo Laohoo]

---

@eng_adel273 wrote:

I have Many Ports ( 10 Ports )  Like that

---

All from the same switch?