03-18-2019 07:30 AM
Hi,
I need help to configure point to point connectivity between two sites. Below is the current configuration.
-Branch range is 10.104.11.0/24
-Branch users Gateway is 10.104.11.1
-DNS should be the same as used in HQ site
-Active Ports on SGN switch on Branch are 15-19
-Active Port on SGN switch on HQ is 15
-You need to connect Port on HQ site to your core switch/Firewall
-The point to Point Link will be 10.104.12.0/30 where NBN is 10.104.12.1
Any help is greatly appreciate.
Thanks
03-18-2019 07:45 AM
Hello,
is this an excercise ? What equipment are you supposed to use ?
03-18-2019 07:56 AM
The original poster mentions a branch and HQ. But does not tell us anything about how they are connected. There is also mention of HQ core but no information about how that is connected. We need better information about the networking environment to be able to give good advice about this question.
HTH
Rick
03-19-2019 08:09 AM
I have Cisco Core Switch(L3) & ASA Firewall& Edge switch(L2) in HQ
also in branch site i have edge switch(L2) just.
I need to connect P2P link between ASA(HQ) and Edge switch(branch) by internet
03-19-2019 08:10 AM
03-19-2019 12:49 PM
If the branch has just a L2 switch then it is not routing and certainly would not have support for any encryption of traffic. I do not know of a way to have a successful point to point link to the branch.
HTH
Rick
03-19-2019 08:08 AM
I have Cisco Core Switch(L3) & ASA Firewall& Edge switch(L2) in HQ
also in branch site i have edge switch(L2) just.
I need to connect P2P link between ASA(HQ) and Edge switch(branch)
03-18-2019 10:09 AM
03-19-2019 08:11 AM
I have Cisco Core Switch(L3) & ASA Firewall& Edge switch(L2) in HQ
also in branch site i have edge switch(L2) just.
I need to connect P2P link between ASA(HQ) and Edge switch(branch) by internet
i want PCs in branch site to connect to other PCs in HQ
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide