Port 80 and Port 443 redirect...on Cisco 3925 Router

[DAVID RICHWALSKI]

Hello,

What I am trying to do is Redirect Port 80 and Port 443

Here is what I believe will work but I thought I would get some advice

ip nat inside source static tcp 192.168.0.3 80 interface GigabitEthernet0/2 60080
ip nat inside source static tcp 192.168.0.3 443 interface GigabitEthernet0/2 60443

Am I correct that this will work ??

Thanks for any Advice

[MHM Cisco World]

sure it work 
from OUTside you will connect using 60080 and router will NATing it to 192.168.0.3/80 
it work.
go ahead 

[Flavio Miranda]

Hi

 Only with this config will not work. You need to identify your inside interface and outside interface and apply the command

ip nat inside and ip  nat outside respectively.