I recently setup a 7206VXR with NPE-G2 in my home lab. Seems to work great. However, I have an openfire XMPP server that needs to have port 5222 forwarded.
Server is 10.5.7.18. G0/1 is my WAN interface
I tried ip nat inside source static tcp 10.5.7.18 5222 int g0/1 5222 - when I did this, it said port 5222 is being used by system.
So I removed my nat ACL, cleared ip nat translations, aand remove my nat overload statement, and tried again, since I read somewhere that this would correct it. The router still said 5222 was being used by the system though
Sh tcp brief gives no output. Neither does sh ip sockets. IOS version is Version 12.4(12.2r)T
If anyone has any ideas I would greatly appreciate it.
Border handoff enhancements: 4-byte ASNEmbedded wireless support on Fabric edgeFiaB deployment models:Multiple VN for Guest Access in Cisco SD-AccessCisco SD-Access Group-Based Access Control PolicyBonjour support for Cisco SD-AccessCisco SD-Access APIs
. My work contains abbundance of networking gear.i have 3945 routers with attatched nme,3850 switches 48 gig port with 4 tengig port,3850 switch with 16 fiber ports, fortigate 600d along with servers with 8tbs of free space.if you have any labs for me id ...
Hello I have a network in prodcution like it mensionned in this picture. The customer wants to renovate the current infrastructure by changing all the hardware. For this reason we had think about deploying DNA Center and make automat...
I want to show how to quickly and reliably troubleshoot a network using notepad++.If you are not using Cisco GENIE and your network is not very big and you have several routers/switches only.For illustration, I created a simple topology.First, the loopbac...