Port Channel 1 Interface down

[prakash.choudhari]

Hi Team I have 1 Switch in office & another in data centre , Connected over Port channel. In port channel 2 switch interface each side is added. if 1 interface in either side will down  then port channel will be down? .

[pman]

Hi,

if 1 interface in either side will down  then port channel will be down? .

---

No, for the port channel to be down then the 2 ports on each side must be down

[prakash.choudhari]

Ok Got it . both port should be down on either side  then only Port channel will be down .  If one interface down then other interface will carry traffic 

[paul driver]

Hello

Correct..

[MHM Cisco World]

if you config min-link and this interface make the number of link less than this value the port-channel will be down.
check this point.