Port-Channel and Policy-Map

[admin@atrinnet.net]

Hi Dears If i want policy-map work in vlan on port-channel on must be add for example

port-channel 1

load-balance vlan

if add this router tx Traffic on one physical interface on port-channel

And inteface so congestion If disable load-balance vlan disable on port-channel 2

traffic is ok but policy-map suspend on vlans

How Solve this ??? Please Help me

[Giuseppe Larosa]

Hello admin@atrinnet.net ,

if the platform is an ASR1000:

break the port-channel and create two ECMP L3 paths eventually use VLAN based subinterfaces on each of them and try to apply PBR on them

CEF will provide load balancing flow based

Hope to help

Giuseppe

[admin@atrinnet.net]

Thanks For attention I Added Sub-Interface on port-channel

for example port-channle 1.2

encapsulation dot1q 2

and load-balance flow base

and apply

when show policy-map interface-port-channel 1.2

show me suspeneded

[Giuseppe Larosa]

Hello admin@atrinnet.net ,

there is no parity feature between port-channels and Equal Cost multi path on routers not only for ASR1000.

this is the reason why I have suggested to unbundle the links and make them indipendent L3 for ECMP at this point CEF performs for your flow based load balancing and you get one or two points where you can apply PBR on inbound user traffic

Hope to help

Giuseppe