I have Cisco 3845 with two Gigabit interfaces configured as port-channel with subinterface and with QoS.
However shape does not work, any ideas why?
interface Port-channel1.1400
encapsulation dot1Q 382
ip address 10.10.10.3 255.255.255.0
service-policy output P1.1400
policy-map P1.1400
class ALL
shape average 1024000
service-policy COLO
#show policy-map interface p1.1400
Port-channel1.1400
Service-policy output: P1.1400
Class-map: ALL (match-any)
8019839 packets, 9515886521 bytes
5 minute offered rate 1875000 bps, drop rate 0 bps
Match: access-group 103
8019839 packets, 9515886521 bytes
5 minute rate 1875000 bps
Queueing
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
shape (average) cir 1024000, bc 4096, be 4096
target shape rate 1024000