cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
166
Views
0
Helpful
1
Replies
Beginner

Port forwarding confusion?

Hi guys,

     Maybe someone can shed some insight on this....

ip nat inside source static tcp 192.168.167.5 10001 interface GigabitEthernet0/1 10001

This works, but, not what I want as it's sending this port to ONE ip.  It shows up in the 'show ip nat trans' command.

I have configured this instead to forward this port to one ip and possibly more in the future...

ip nat pool PORTFWD2 192.168.167.5 192.168.167.5 netmask 255.255.255.252 type rotary

ip nat inside destination list 103 pool PORTFWD2

access-list 103 permit tcp any host 192.168.167.5 eq 10000

Sooooooo, nothing is showing up in the 'matches' for this acl.  Also, nothing is going thru for forwarding.

Ideas?

Thanks for eveyone's time!

Jason

Everyone's tags (2)
1 REPLY 1
Highlighted
Beginner

Port forwarding confusion?

Hi,

Example should be:

access-list 103 permit tcp any host 192.168.167.5 eq 10001

Thanks.